Mobile Bodyshop Case Studies
We have carried out bodywork repairs on 1000’s of commercial vehicles since we started our unique mobile bodyshop and panel painting service, and we have documented some of them below. Our case studies should give you a clear insight into what we are able to do for your fleet of commercial vehicles, whether that is only a handful of vehicles or 100’s – we can help you keep your vehicles off road (VOR) time to a minimum.
-
DAF Truck O/S Cab door Case Study
This repair involved stripping the door card and removing the handle before working the metal and completing a cosmetic SMART repair. This job took half a day and was completed at the customers site.
-
Scania Truck O/S Cab door Case Study
This lorry door had been caught by a trailer and pushed right in. We were able to attend site and repair and paint the door within one working day, the truck was back out on hire the following day.
-
Transit O/S/R D pillar and Quarter Case Study
This vehicle came to us with a variety of damage on it, including O/S rear loading door and various minor dents on other panels. As well as dealing with these we completed the repairs featured below, O/S rear D pillar and O/S rear quarter panel. These repairs were completed at the customers site and the…
-
Transit N/S/R D pillar Case Study
A common type of damage for high top vans, this N/S/R D pillar required the metal working back into shape before a cosmetic repair was completed. This repair was completed onsite and in one working day.
-
Transit Tipper Break in Damage Case Study
This is a common type of damage. Thieves will drill or cut holes in door skins to access the door mechanisms. When repairing these we work the metal back to the correct shape, weld a plate to cover the hole and then cosmetically repair it. This type of job is completed at customers sites and…
-
Transit N/S Sliding Door Step Replacement Case Study
This Transit 350 had a badly damaged N/S sliding door step that was interfering with the correct operation of the sliding door. We removed the old step and welded the new one into place. Once it was painted it was ready for its new floor and back with the customer.
-
DAF Fixed Body Repairs Case Study
This fixed body DAF truck came into us with gouges and a hole/rip in the N/S box panel, a damaged lower rail and a dented N/S cab door. After completing the cosmetic repairs and painting, the truck was returned to the customer as good as new.
-
HGV cab N/S quarter panel repair Case Study
We were asked recently if we could repair the damage seen below to the N/S quarter panel on the cab of this DAF truck. Once we stripped the interior away from the damaged panel we were able to start the repair process and work the metal back into shape. With some cosmetic finishing work to…
-
Transit Van Rear Door Repairs Case Study
This job was completed at a customers site as a priority and completed within a day. Both rear doors had multiple dents. A combination of dent pulling and working the metal from behind reduced the filler work and resulted in the doors looking as good as new.